Showing all 7 results

11kW Snow melting thermostat with moisture detection option

Type: ETO2

An intelligent all-in-one solution for ice and snow melting for use in all applications within hydronic as well as electrical heating. Optimal operation is ensured due to output control which makes the system both effective and economical. ETO2 offers you the possibility of snow melting – the green way.

Thermostat functions for minimal energy use

Using readings from temperature and moisture sensors, the controller ensures economical control of power consumption when keeping outdoor areas and roofs free of ice and snow. The moisture sensor is installed in the surface of the outdoor area or placed in the gutter. As soon as moisture is detected, the ETO2 controller activates the snow melting system. Once the sensor has dried out, the thermostat immediately goes in afterrun and the system will continue to provide heat for a predetermined amount of time.

Instructions User Manual
ETR2 Thermostat

3.6kW Snow melting thermostat with moisture detection option

The ETR2 gives an economical control of ice-and snow melting for all smaller applications. With focus on power consumption and easy installation, the ETR2 keeps gutters and small ground areas free of ice and snow.

  • Detection of temperature and moisture
  • Electronic on/off control up to 3,600W
  • For roof or gutter applications
  • Easy to install
  • Adjustable moisture sensitivity
  • Possibility to activate forced heat
  • Economical control of ice and snow melting in the outdoor area and gutters
Driveway heating cable with 15m coldtail

Driveway heating cable with 15m coldtail

Suitable for:

Concrete, Tarmac, Resin and in sand under Paving stones / Slabs

A high-quality uniquely designed cable suitable for heating beneath virtually any exterior surface. The cable forms the major part of HDS’s industry leading ice and snow melting systems for ramps, driveways, car parks, pathways and steps.

The sacrificial outer layer of insulation enables the cable to be directly covered with hot asphalt, saving time and costs when compared to a conventional heating cable installation.

Factsheet
FRO-TEM-SENS External ASir `Temperature Sensor

External air temperature sensor

The ETF-744/99 sensor is suitable for measuring outdoor temperature, and is normally used in combination with ETOR gutter sensors, but can also be used separately for temperature measurement only. An ETF sensor can also be used in combination with ETOG ground sensors for outdoor areas. The ETF sensor can detect rapid drops in air temperature, thus avoiding icy areas.

External-ground pipe temperature sensor

External ground/pipe temperature sensor

ETF is a temperature sensor designed for temperature control and monitoring in heating and cooling systems, and is suitable for pipe mounting (metal head).

The ETF sensor provides optimum temperature control.

FRO-GRO-SENS External moisture and temperature ground sensor

External moisture and temperature ground sensor

The ground sensor, type ETOG-55, is designed for embedding into the surface of the outdoor area. The sensor detects both temperature and moisture.

The sensor can be mounted where snow and ice problems normally occur.